Who am I?
Who am I?
I am a metallurgist cum chemist with an interest in problem-solving in the material and metal extraction fields. I have specific interest in the development of novel, sustainable methods of metals extraction from low-grade ores and wastes and waste utilisation.
Why do I teach?
Global resources of various metals are reaching critically low levels and the necessity of developing new sustainable methods to extract these critical metals from different resources is essential for technology advancement to continue. By being involved in this exciting new direction for metallurgists, I find it imperative to transfer this new knowledge to the scientists/researchers of the future.
Words of wisdom
Adapt to change as fast as you can and never give up on seeking new opportunities to make a contribution to mankind.
How I’ll teach you
I teach through examples and applications of knowledge.
Academic Biography
Academic and professional qualifications
ACADEMIC QUALIFICATIONS:
B.Sc (Chemistry, Physics and Mathematics majors) 1979
B.Sc(Hons.) Chemistry 1980
M.Sc(Chemistry) 1981
B.Sc(Hons.) Water and Environmental Science 1986
Ph.D (Metallurgy and Materials Engineering) 1996
Doc.Tech. (Chemistry) 2002
PROFESSIONAL QUALIFICATIONS:
Chartered Chemist (Royal Society of Chemistry (RSC) - 1992.
Chartered Engineer (Institute of Materials, Minerals & Mining - IOM3) 2012
Previous employment
Uranium Enrichment Corporation of South Africa (1982 - 1985)
University of Pretoria, SA (1985 - 1989)
Council for Mineral Technology (Mintek), SA (1990 - 1992)
Pretoria Portland Cement Co., SA (1993 - 1999)
Technikon Pretoria/Tshwane University of Technology (TUT), SA (1999 - 2004)
University of the Witwatersrand, SA (2004 - 2008; 2015- )
Manchester Metropolitan University, UK (2008 - )
HONORARY/VISITING POSITIONS:
Visiting professor: Wuhan Institute of Technology, China (2018 - current)
Visiting professor: Aalto University, Finland (2020 - current)
Visiting professor: Beijing University of Technology, China (2018 - current)
Visiting professor: Tshwane University of Technology, South Africa (2014 - current)
Other academic service (administration and management)
Journal Editor roles:
Associate Editor: Corrosion Engineering, Science and Technology (2013 - )
Editor (one of team of 3): African Corrosion Journal (2014 - current)
Subject editor: South African Journal of Science & Technology (2018 - current)
Member of Editorial Boards:
Journal of Hazardous Materials (2004 - 2014)
Journal of Radioanalytical and Nuclear Chemistry (2003 - 2014)
Journal of the Southern African Institute of Mining and Metallurgy (2005 - 2019)
Materials (2019 - current)
ACADEMIC PROGRAMME ACCREDITATION ROLES:
Leader of Metallurgical Engineering accreditation teams to: UNAM (University of Namibia) (2015) and NUST (National University of Science and Technology, Namibia) (2016)
Leader Assessment team for new Civil Engineering degree for Abu Dhabi Council of Higher Education (2018)
ECSA (Engineering Council South Africa) Accreditation team to University of Pretoria, Sept 2007 (Metallurgy team)
Languages
English (read, write, speak)
Afrikaans (read, write, speak)
Dutch (read)
Teaching & Research Supervision
Why study Waste transformation & utilisation, Metallurgy, Materials Science (Chemistry, Environmental Science, Water Treatment)?
Global challenges force us to study the drivers behind these challenges and the impact it has on ecosystems, the economy, and the human race. At the core of most of the solutions to these challenges, you will find that materials are playing a role somewhere in the chain of events/processes. By studying waste transformation and utilisation, you will be investigating new and novel methods of extracting precious and critical metals from waste, using one or two-step processes, in a quest to provide these commodities for further material development in a sustainable way.
Undergraduate courses
Level 4: Chemistry in society 1
Level 5: Chemistry in society 2
Postgraduate teaching
My postgraduate teaching is currently mainly supervision of MSc research students.
Postgraduate supervision (completed/in progress)
CURRENT UK:
H.Gaddah - Ph.D (water treatment)
K.Burns - Ph.D (New green modifiers for PVC)
K.Irwin - Ph.D (The creation of a novel predictive model for compounded poly(vinyl chloride) formulations through various characterisation techniques and vibrational spectroscopic mapping.)
COMPLETED UK:
L. Mgbeahuruike - Ph.D (Remediation of contaminated soil) 2019
K. Tafwiq - Ph.D (Synthesis and characterisation of photosensitive compounds) (Completed 2016)
H Robinson - MSc (Method validation of PAH in edible oils) 2016
Hulya Kars - MSc (Potentially toxic elements & persistent organic pollutants in hair: A case study of Greater Manchester) 2019
I Emaldi - MSc (An investigation into using polypropylene in rota moulding applications) 2013
D Velado - MSc (The effect of fly ash as filler in various polymers and polymer mixes) 2012
Itziar Iraola-Arragui - MSc (The effect of fly ash as filler in polypropylene) 2011
Gemma Mitchell - MSc (Characterisation of Egyptian faiensce and Shabtis figurines) 2010
CURRENT SOUTH AFRICA:
M. Maschiba - M.Sc. (Gold recovery through a gas phase extraction process in a fluidised bed reactor)
S. Teimouri - Ph.D. (Ionic liquids as gold leaching reagents)
D. Ashiegbu - Ph.D (Nanomaterial synthesis for water pollution remediation)
I Ali - MSc (Gas phase extraction of gold with various ligands in a fluidised bed reactor)
A Narain - MSc (The effect of ionic composition of process water on pyrite flotation)
A Tripathy - MSc (Jigging separation of coal)
L Habile - MSc (Beneficiation of ilmenite to titanium dioxide)
H Yingwani - MSc (Evaluation of particulate matter emissions from jet engines: analysis of chemical and physical characteristics)
M Henderson - MSc (Supercritical CO2 extraction of Gold from tailings)
COMPLETED SOUTH AFRICA (2015 - current)
ZH Masuku - MTech (Tribological and electrochemical behavior of sprayed W and Cr carbide coatings) 2015
OS Olaniron - DTech (Electrochemical and tribological behavior of oxide dispersion strengthened duplex stainless steels) 2015
J Ngoy - DTech (CO2 adsorption on a synthetically prepared polymer) - 2015
N Maledi - PhD (Coal ash charaterisation of different SA coals with various analytical techniques) 2017
Z Mudzanani - MSc (Implementation of project controls in large construction site (Case study: Kusile Project)) - 2017
K Premlall - PhD (CO2 adsorption onto different SA coals ) 2019
G Mawira - MSc (Supercritical fluid extraction of Gold) 2019
T Ngaki - MSC (Synthesis, compu-tational and electro-chemistry of N,O-bi-dentate ligands and their Ru complexes) 2019
S Javaid - MSc (Towards a technology framework for the evaluating and optimising of the metal flow process for copper production) - 2019
S Teimouri - MSc (Ionic liquid leaching of gold from refractory ores) 2019
External examiner roles
EXTERNAL EXAMINER EXPERIENCE - POSTGRADUATE: Acted as the external examiner for dissertations theses from:
University of Pretoria - 7 x Ph.D & 7 MSc
University of the Orange Free State: 4 x Ph.D. & 9 x M.Sc
University of Natal - 1 x M.Sc
University of Transkei - 1 x M.Sc
University of North West - 6 x M.Sc (Eng);6 x Ph.D (Eng)
Technikon Pretoria/Tshwane University of Technology 5 x M.Tech.(Eng) & 3x DTech
Nelson Mandela University - 1 x M.Tech.; 1 x D.Tech.
University of Johannesburg - 1 x M.Tech & 2x DTech
University of the Western Cape - 1 x M.Sc.
University of the Witwatersrand - 4 x Ph.D;5 x M.Sc
National University of Malaysia - 1 x Ph.D (Eng)
Manchester University - 1 x MSc & 1x PhD
Laparenta University of Technology - 2x PhD
Government College University, Pakistan - 2x PhD
Agricultural University, Pakistan - 2x PhD
Research Expertise, Publications & Grants
Research expertise
I have research expertise in a myriad of areas, due to my career path and diverse education. This has enabled research in:
novel methods for metal extraction from low-grade resources such as wastes (i.e recycling, recovery and re-use)
Waste utilisation
Corrosion (aqueous & high temperature)
Water treatment.
Academic collaborations
CURRENT RESEARCH COLLABORATIONS
1.Prof Mari Lundstrom, Department of Chemical and Metallurgical engineering, Alto University, Finland (metal extraction)
2.Prof Dongsheng He, Xingfa School of Mining, Wuhan Institute of Technology, China (metals extraction)
3.Prof Vladimir An, Domsk Polytechnical University, Rusia (Electrochemistry)
4.Prof. Peter Olubambi, Department of Chemical Engineering, University of Johannesburg, Johannesburg, South Africa
5.Prof. Walter Purcell, Dept of Chemistry, University of the Free State, Bloemfontein, South Africa (metals'chemistry)
6.Prof. Jeanet Conradie, Dept of Chemistry, University of the Free State, Bloemfontein, South Africa (electrochemistry & modelling)
Publications
·Featured Works
AO. Adegbenjo, PA. Olubambi, JH. Potgieter, MB. Shongwe, M. Ramakokovhu (2017).Spark plasma sintering of graphitized multi-walled carbon nanotube reinforced Ti6Al4V.Materials and Design.128, pp.119-129.
I. Iraola-Arregui, CM. Liauw, H. Potgieter (2014).Poly(propylene)/Fly Ash Composites: Effect of Coupling Agents on Mechanical Properties and Matrix Crystallinity.Macromolecular Symposia.338(1), pp.62-71.
CM. Liauw, I. Iraola-Arregui, JH. Potgieter (2014).Effect of coupling agents on the degradation of polypropylene/fly ash composites.Journal of Applied Polymer Science.131(6),
H. Potgieter, C. Liauw, D. Velado (2014). Properties and performance of a simulated consumer polymer waste - Coal combustion byproduct composite material.Polymer Engineering and Science.54(6), pp.1239-1247.
H. Potgieter, C. Mark Liauw, D. Velado (2013).Effect of fly ash washing conditions on the properties of coupling agent modified polypropylene/fly ash composites.Polymer Composites.
·Journal articles
V. An, H. Potgieter, N. Usoltseva, D. Valiev, S. Stepanov,et al.(2021).MoS2@ZnO Nanoheterostructures Prepared by Electrospark Erosion for Photocatalytic Applications.Nanomaterials.11,
VV. Korobochkin, JH. Potgieter, NV. Usoltseva, AS. Dolinina, VV. An (2020).Thermal preparation and characterization of nanodispersed copper-containing powders produced by non-equilibrium electrochemical oxidation of metals.Solid State Sciences.108, pp.106434-106434.
S. Teimouri, JH. Potgieter, GS. Simate, L. van Dyk, M. Dworzanowski (2020).Oxidative leaching of refractory sulphidic gold tailings with an ionic liquid.Minerals Engineering.156, pp.106484-106484.
JH. Potgieter, C. Pardesi, S. Pearson (2020).A kinetic and thermodynamic investigation into the removal of methyl orange from wastewater utilizing fly ash in different process configurations.Environ Geochem Health.
T-T. Han, L-N. Wang, JH. Potgieter (2020).ZIF-11 derived nanoporous carbons with ultrahigh uptakes for capture and reversible storage of volatile iodine.Journal of Solid State Chemistry.282, pp.121108-121108.
S. Teimouri, G. Mawire, JH. Potgieter, GS. Simate, L. van Dyk,et al.(2020).Using experimental design and response surface methodology (RSM) to optimize gold extraction from refractory sulphidic gold tailings with ionic liquids.Journal of the Southern African Institute of Mining and Metallurgy.120(7), pp.415-423.
M. Heydartaemeh, M. Karamoozian, H. Potgieter (2019).Application of nano high-entropy alloys to reduce energy consumption and wear of copper oxide and high-grade iron ores in heavy mining industries— A case study.Minerals.10(1),
TL. Ngake, JH. Potgieter, J. Conradie (2019).Tris(β-ketoiminato)ruthenium(III) complexes: Electrochemical and computational chemistry study.Electrochimica Acta.320,
TL. Ngake, JH. Potgieter, J. Conradie (2018).Electrochemical behaviour of amino substituted β-amino α,β-unsaturated ketones: A computational chemistry and experimental study.Electrochimica Acta.296, pp.1070-1082.
J. Conradie, MM. Conradie, Z. Mtshali, JH. Potgieter (2018).DFT and CV data of 4-phenyl-substituted dichloro(bis{2-[1-(phenyl)-1H-1,2,3-triazol-4-yl-κN3]pyridine-κN})iron(II) coordination compounds.Data in Brief.21, pp.375-385.
J. Conradie, MM. Conradie, KM. Tawfiq, SJ. Coles, GJ. Tizzard,et al.(2018).Jahn–Teller distortion in 2-pyridyl-(1,2,3)-triazole-containing copper(ii) compounds.New Journal of Chemistry.42(19), pp.16335-16345.
J. Conradie, MM. Conradie, Z. Mtshali, D. van der Westhuizen, KM. Tawfiq,et al.(2018).Synthesis, characterisation and electrochemistry of eight Fe coordination compounds containing substituted 2-(1-(4-R-phenyl-1H-1,2,3-triazol-4-yl)pyridine ligands, R = CH3, OCH3, COOH, F, Cl, CN, H and CF3.Inorganica Chimica Acta.484, pp.375-385.
J. Conradie, MM. Conradie, KM. Tawfiq, MJ. Al-Jeboori, C. D'Silva,et al.(2018).Chemical and structural data of (1,2,3-triazol-4-yl)pyridine-containing coordination compounds.Data in Brief.20, pp.1397-1408.
J. Conradie, MM. Conradie, KM. Tawfiq, MJ. Al-Jeboori, SJ. Coles,et al.(2018).Novel dichloro(bis{2-[1-(4-methylphenyl)-1H-1,2,3-triazol-4-yl-κN3]pyridine-κN})metal(II) coordination compounds of seven transition metals (Mn, Fe, Co, Ni, Cu, Zn and Cd).Polyhedron.151, pp.243-254.
W. Purcell, H. Potgieter, M. Nete, H. Mnculwane (2018).Possible methodology for niobium, tantalum and scandium separation in ferrocolumbite.Minerals Engineering.119, pp.57-66.
J. Conradie, MM. Conradie, KM. Tawfiq, MJ. Al-Jeboori, SJ. Coles,et al.(2018).Synthesis, characterization, experimental and theoretical structure of novel Dichloro(bis{2-[1-(4-methoxyphenyl)-1H-1,2,3-triazol-4-yl-κN3]pyridine-κN})metal(II) compounds, metal = Mn, Co and Ni.Journal of Molecular Structure.1161, pp.89-99.
AO. Adegbenjo, PA. Olubambi, JH. Potgieter, MB. Shongwe, M. Ramakokovhu (2017).Spark plasma sintering of graphitized multi-walled carbon nanotube reinforced Ti6Al4V.Materials and Design.128, pp.119-129.
BK. Al-Rubaye, A. Brink, GJ. Miller, H. Potgieter, MJ. Al-Jeboori (2017).Crystal structure of (E)-4-benzylidene-6-phenyl-1,2,3,4,7,8,9,10-octahydrophenanthridine.Acta Crystallographica Section E: Crystallographic Communications.73(7), pp.1092-1096.
J. Singh, E. Luquet, DPT. Smith, JH. Potgieter, P. Ragazzon (2016).Toxicological and analytical assessment of e-cigarette refill components on airway epithelia.Science Progress.99(4), pp.351-398.
E. Almelah, DPT. Smith, A. McGown, A. Aziz, JH. Potgieter,et al.(2016).Dibenzoyl-methane derivatives as a potential and exciting new therapy for the treatment of childhood bone cancer.Anticancer Research.36(11), pp.6043-6050.
JH. Potgieter (2015).The School of Chemical and Metallurgical Engineering at the University of the Witwatersrand.JOURNAL OF THE SOUTHERN AFRICAN INSTITUTE OF MINING AND METALLURGY.115(12), pp.IV-V.
ZH. Masuku, PA. Olubambi, JH. Potgieter, BA. Obadele (2015).Tribological and Corrosion Behavior of HVOF-Sprayed WC-Co-Based Composite Coatings in Simulated Mine Water Environments.Tribology Transactions.58(2), pp.337-348.
GC. Borillo, YS. Tadano, AFL. Godoi, SSM. Santana, FM. Weronka,et al.(2015).Effectiveness of selective catalytic reduction systems on reducing gaseous emissions from an engine using diesel and biodiesel blends.Environ Sci Technol.49(5), pp.3246-3251.
F. Anjum, SA. Bukhari, M. Siddique, M. Shahid, JH. Potgieter,et al.(2015).Microwave Irradiated Copolymerization of Xanthan Gum with Acrylamide for Colonic Drug Delivery.BIORESOURCES.10(1), pp.1434-1451.
JH. Potgieter, J. Thomson, FV. Adams, AS. Afolabi (2014).Effect of Additions of Ru and Pd on the Electrochemical Behaviour of Austenitic Stainless Steel in Organic Acids.INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE.9(11), pp.6451-6463.
SK. Mohamed, M. Akkurt, H. Potgieter, M. Ali (2014).Crystal structure of 1H-imidazol-3-ium 2-(1,3-dioxoisoindolin-2-yl)acetate.Acta Crystallographica Section E: Crystallographic Communications.70(9), pp.o979-o980.
JT. Mague, SK. Mohamed, M. Akkurt, H. Potgieter, MR. Albayati (2014).N′-[(E)-2-chlorobenzylidene]-2-(6-methoxynaphthalen-2-yl) propanohydrazide.Acta Crystallographica Section E: Crystallographic Communications.70(6),
I. Iraola-Arregui, CM. Liauw, H. Potgieter (2014).Poly(propylene)/Fly Ash Composites: Effect of Coupling Agents on Mechanical Properties and Matrix Crystallinity.Macromolecular Symposia.338(1), pp.62-71.
KM. Tawfiq, GJ. Miller, MJ. Al-Jeboori, PS. Fennell, SJ. Coles,et al.(2014).Comparison of the structural motifs and packing arrangements of six novel derivatives and one polymorph of 2-(1-phenyl-1H-1,2,3-triazol-4-yl)pyridine.Acta Crystallogr B Struct Sci Cryst Eng Mater.70(Pt 2), pp.379-389.
CM. Liauw, I. Iraola-Arregui, JH. Potgieter (2014).Effect of coupling agents on the degradation of polypropylene/fly ash composites.Journal of Applied Polymer Science.131(6),
SK. Mohamed, JT. Mague, M. Akkurt, H. Potgieter, MR. Albayati (2014).A new polymorph of N-(2-{N′-[(1E)-2-hy­dr­oxy­benzyl­­idene]hydrazinecarbon­yl}phen­yl)benzamide.Acta Crystallographica Section E: Crystallographic Communications.70(6),
H. Potgieter, C. Liauw, D. Velado (2014). Properties and performance of a simulated consumer polymer waste - Coal combustion byproduct composite material.Polymer Engineering and Science.54(6), pp.1239-1247.
D. Velado, H. Potgieter, CM. Liauw (2013). Investigation into the adsorption of a commercial coupling agent for polymers onto pretreated fly ash filler particles.Journal of Applied Polymer Science.130(6), pp.3985-3992.
AS. Al-Fahdawi, HA. Al-Kafajy, MJ. Al-Jeboori, SJ. Coles, C. Wilson,et al.(2013).N,N'-Bis(di-phenyl-meth-yl)benzene-1,4-di-amine.Acta Crystallographica Section E: Crystallographic Communications.70(Pt 1), pp.o66-o66.
AS. Al-Fahdawi, HA. Al-Kafajy, MJ. Al-Jeboori, SJ. Coles, C. Wilson,et al.(2013). N,N′-Bis(diphenylmethyl)benzene-1,4-diamine.Acta Crystallographica Section E: Crystallographic Communications.70(1),
H. Potgieter, C. Mark Liauw, D. Velado (2013).Effect of fly ash washing conditions on the properties of coupling agent modified polypropylene/fly ash composites.Polymer Composites.
D. Velado, H. Potgieter, C. Mark Liauw (2013). Investigation into the adsorption of a commercial coupling agent for polymers onto pretreated fly ash filler particles.Journal of Applied Polymer Science.
C. Mark Liauw, I. Iraola-Arregui, JH. Potgieter (2013). Effect of coupling agents on the degradation of polypropylene/fly ash composites.Journal of Applied Polymer Science.
H. Potgieter, C. Liauw, D. Velado (2013). Properties and performance of a simulated consumer polymer waste-coal combustion byproduct composite material.Polymer Engineering and Science.
F. Anjum, M. Shahid, SA. Bukhari, JH. Potgieter (2013). Combined ultrasonic and bioleaching treatment of hospital waste incinerator bottom ash with simultaneous extraction of selected metals.Environmental Technology (United Kingdom).
SO. Bada, JH. Potgieter, AS. Afolabi (2013). Kinetics studies of adsorption and desorption of South African fly ash for some phenolic compounds.Particulate Science and Technology.31(1), pp.1-9.
SK. Mohamed, M. Albayati, WAM. Omara, AA. Abdelhamid, H. Potgeiter,et al.(2012). Functionalization of ibuprofen core structure compound: Part 1 Synthesis of potential chemotherapeutic agents incorporated ibuprofen substructure and their in vitro antimicrobial study.Journal of Chemical and Pharmaceutical Research.4(7), pp.3505-3517.
SK. Mohamed, GA. Bogdanović, AA. Abdelhamid, SB. Novaković, H. Potgeiter (2012). 4-[(2E)-2-(2-Hydroxybenzylidene)-hydrazin-1-yl]benzonitrile.Acta Crystallographica Section E: Structure Reports Online.68(10),
L. Tosheva, A. Brockbank, B. Mihailova, J. Sutula, J. Ludwig,et al.(2012). Micron- and nanosized FAU-type zeolites from fly ash for antibacterial applications.Journal of Materials Chemistry.22(33), pp.16897-16905.
SK. Mohamed, M. Akkurt, AA. Abdelhamid, PE. Fanwick, H. Potgeiter (2012). 7-Bromo-9-(2-hydroxy-4,4-dimethyl-6-oxocyclohex-1-en-1-yl)-3,3-dimethyl-2, 3,4,9-tetrahydro-1H-xanthen-1-one.Acta Crystallographica Section E: Structure Reports Online.68(6),
LD. Van Dyk, EMR. Mariba, Y. Chen, A. Johnson, JH. Potgieter (2012). Gas-phase extraction of lead and iron from their oxides in a fluidized-bed reactor.Journal of the Southern African Institute of Mining and Metallurgy.112(6), pp.461-465.
JH. Potgieter, H. Gregory (2012).Dissolution kinetics of quicklime in various organic solvents and solutions.Environ Technol.33(10-12), pp.1191-1195.
SK. Mohamed, PN. Horton, M. Akkurt, MR. Albayati, H. Potgeiter (2012). 2-Hy-droxy-N′-[2-(6-meth-oxy-naphthalen-2-yl)propano-yl] benzohydrazide.Acta Crystallographica Section E: Structure Reports Online.68(4),
AA. Abdelhamid, SK. Mohamed, M. Akkurt, K. Singh, H. Potgieter (2012). 1-(2-Hy-droxy-eth-yl)-3-phenyl-thio-urea.Acta Crystallographica Section E: Structure Reports Online.68(4),
SK. Mohamed, M. Akkurt, AAA. Elhamid, K. Singh, H. Potgieter (2012). (6Z)-4-Bromo-6-{[(2-hy-droxy-eth-yl)amino]-methyl-idene}cyclo-hexa-2, 4-dien-1-one.Acta Crystallographica Section E: Structure Reports Online.68(4),
SK. Mohamed, M. Akkurt, MR. Albayati, K. Singh, H. Potgieter (2012). 2-(4-Isobutyl-phen-yl)-N′-[(3Z)-2-oxoindolin-3-yl-idene] propano-hydrazide.Acta Crystallographica Section E: Structure Reports Online.68(4),
JH. Potgieter, H. Gregory (2012). Dissolution kinetics of quicklime in various organic solvents and solutions.Environmental Technology (United Kingdom).33(10), pp.1191-1195.
H. Potgieter, H. Gregory (2011). Dissolution kinetics of chemically pure quicklime in the presence of various anions.ZKG International.64(11), pp.56-63.
DJ. Delport, SS. Potgieter-Vermaak, RI. McCrindle, JH. Potgieter (2011). Potentiometric determination of free chloride in cement paste - An alternative method for low-budget laboratories.South African Journal of Chemistry.64, pp.251-253.
I. Iraola-Arregui, H. Potgieter, CM. Liauw (2011). Evaluation of coupling agents in poly(propylene)/fly ash composites: Effect on processing and mechanical properties.Macromolecular Materials and Engineering.296(9), pp.810-819.
JH. Potgieter, DJ. Delport, S. Verryn, SS. Potgieter-Vermaak (2011). Chloride-binding effect of blast furnace slag in cement pastes containing added chlorides.South African Journal of Chemistry.64, pp.108-114.
K. Premlall, JH. Potgieter, S. Sanja (2011). Laser surface treatment to inhibit observed corrosion of reinforcing steel in sulphate: Alkaline media.Anti-Corrosion Methods and Materials.58(5), pp.267-284.
JH. Potgieter, N. Thanjekwayo, P. Olubambi, N. Maledi, SS. Potgieter-Vermaak (2011). Influence of Ru additions on the corrosion behaviour of WC-Co cemented carbide alloys in sulphuric acid.International Journal of Refractory Metals and Hard Materials.29(4), pp.478-487.
AS. Afolabi, JH. Potgieter, AS. Abdulkareem, N. Fungura (2011). Effect of tempering temperature and time on the corrosion behaviour of 304 and 316 austenitic stainless steels in oxalic acid.World Academy of Science, Engineering and Technology.79, pp.87-91.
I. Fedotov, T. Fedotova, SL. Pityana, K. Labuschange, M. Shatalov,et al.(2011). A mathematical model of laser surface heat-cooling treatment for medium carbon steel.Journal of the Southern African Institute of Mining and Metallurgy.111(6), pp.379-384.
A. Worobiec, L. Darchuk, A. Brooker, H. Potgieter, R. Van Grieken (2011). Damage and molecular changes under a laser beam in SEM-EDX/MRS interface: A case study on iron-rich particles.Journal of Raman Spectroscopy.42(4), pp.808-814.
S. Potgieter-Vermaak, N. Maledi, N. Wagner, JHP. Van Heerden, R. Van Grieken,et al.(2011). Raman spectroscopy for the analysis of coal: A review.Journal of Raman Spectroscopy.42(2), pp.123-129.
Y. Chen, ERM. Mariba, L. Van Dyk, JH. Potgieter (2011). A review of non-conventional metals extracting technologies from ore and waste.International Journal of Mineral Processing.98(1-2), pp.1-7.
SS. Potgieter-Vermaak, A. Mmari, R. Van Grieken, RI. McCrindle, JH. Potgieter (2011). Degradation of galvanised iron roofing material in Tanzania by atmospheric corrosion.Corrosion Engineering Science and Technology.46(5), pp.642-650.
JH. Potgieter (2010). Corrosion of passive alloys: The effect of noble metal additions. pp.2224-2249.
DS. Konadu, JVD. Merwe, JH. Potgieter, S. Potgieter-Vermaak, CN. Machio (2010). The corrosion behaviour of WC-VC-Co hardmetals in acidic media.Corrosion Science.52(9), pp.3118-3125.
FV. Adams, PA. Olubambi, JH. Potgieter, J. Van Der Merwe (2010). Corrosion resistance of duplex stainless steels in selected organic acids and organic acid/chloride environments.Anti-Corrosion Methods and Materials.57(3), pp.107-117.
JH. Potgieter, NB. Maledi, M. Sephton, LA. Cornish (2010).The Platinum Development Initiative: Platinum-Based Alloys for High Temperature and Special Applications: Part IV.PLATINUM METALS REVIEW.54(2), pp.112-119.
JH. Potgieter, NB. Maledi, M. Sephton, LA. Cornish (2010). Platinum-based alloys for high temperature and special applications: Part IV.Platinum Metals Review.54(2), pp.112-119.
ZS. Msindo, V. Sibanda, JH. Potgieter (2010).Electrochemical and physical characterisation of lead-based anodes in comparison to Ti-(70%) IrO2/(30%) Ta2O5 dimensionally stable anodes for use in copper electrowinning.Journal of Applied Electrochemistry.40(3), pp.691-699.
L. Van Dyk, ERM. Mariba, Y. Chen, JH. Potgieter (2010).Gas phase extraction of iron from its oxide in a fluidized bed reactor.Minerals Engineering.23(1), pp.58-60.
H. Potgieter (2009).A letter from Manchester.JOURNAL OF THE SOUTH AFRICAN INSTITUTE OF MINING AND METALLURGY.109(11), pp.VI-VII.
PA. OLUBAMBI, JH. POTGIETER, S. NDLOVU, JO. BORODE (2009). Electrochemical studies on interplay of mineralogical variation and particle size on bioleaching low grade complex sulphide ores.Transactions of Nonferrous Metals Society of China (English Edition).19(5), pp.1312-1325.
PA. Olubambi, JH. Potgieter (2009). Investigations on the mechanisms of sulfuric acid leaching of chalcopyrite in the presence of hydrogen peroxide.Mineral Processing and Extractive Metallurgy Review.30(4), pp.327-345.
ESM. Sherif, JH. Potgieter, JD. Comins, L. Cornish, PA. Olubambi,et al.(2009). Effects of minor additions of ruthenium on the passivation of duplex stainless-steel corrosion in concentrated hydrochloric acid solutions.Journal of Applied Electrochemistry.39(8), pp.1385-1392.
ESM. Sherif, JH. Potgieter, JD. Comins, L. Cornish, PA. Olubambi,et al.(2009). The beneficial effect of ruthenium additions on the passivation of duplex stainless steel corrosion in sodium chloride solutions.Corrosion Science.51(6), pp.1364-1371.
PA. Olubambi, JH. Potgieter, L. Cornish (2009). Corrosion behaviour of superferritic stainless steels cathodically modified with minor additions of ruthenium in sulphuric and hydrochloric acids.Materials and Design.30(5), pp.1451-1457.
JH. Potgieter, SO. Bada, SS. Potgieter-Vermaak (2009). Adsorptive removal of various phenols from water by South African coal fly ash.Water SA.35(1), pp.89-96.
PA. Olubambi, JH. Potgieter, JO. Borode (2008). Effectiveness of biohydrometallurgy for sustainable development in the African minerals industry: A case study with a low grade ore from Nigeria.Transactions of the Institutions of Mining and Metallurgy, Section C: Mineral Processing and Extractive Metallurgy.117(4), pp.231-235.
PA. OLUBAMBI, S. NDLOVU, JH. POTGIETER, JO. BORODE (2008). Role of ore mineralogy in optimizing conditions for bioleaching low-grade complex sulphide ores.Transactions of Nonferrous Metals Society of China (English Edition).18(5), pp.1234-1246.
JH. Potgieter, PA. Olubambi, L. Cornish, CN. Machio, ESM. Sherif (2008). Influence of nickel additions on the corrosion behaviour of low nitrogen 22% Cr series duplex stainless steels.Corrosion Science.50(9), pp.2572-2579.
PA. Olubambi, S. Ndlovu, JH. Potgieter, JO. Borode (2008). Mineralogical characterization of Ishiagu (Nigeria) complex sulphide ore.International Journal of Mineral Processing.87(3-4), pp.83-89.
PO. Iyuke, M. Cross, SE. Iyuke, HJ. Potgieter (2007). The Role of a University in Education and Training in the Field of Nanotechnology. The Case of the University of the Witwatersrand.Education for Chemical Engineers.2(1), pp.56-67.
AM. Idris, MAH. Eltayeb, SS. Potgieter-Vermaak, R. Van Grieken, JH. Potgieter (2007). Assessment of heavy metals pollution in Sudanese harbours along the Red Sea Coast.Microchemical Journal.87(2), pp.104-112.
LA. Cornish, R. Süss, R. Völkl, M. Wenderoth, S. Vorberg,et al.(2007). Overview of the development of new Pt-based alloys for high temperature application in aggressive environments.Journal of the Southern African Institute of Mining and Metallurgy.107(11), pp.697-711.
PA. Olubambi, JH. Potgieter, JY. Hwang, S. Ndlovu (2007). Influence of microwave heating on the processing and dissolution behaviour of low-grade complex sulphide ores.Hydrometallurgy.89(1-2), pp.127-135.
JH. Potgieter, M. Sephton, ZW. Nkosi (2007). Corrosion of hot end automotive exhaust components.Anti-Corrosion Methods and Materials.54(3), pp.180-187.
SS. Potgieter-Vermaak, JH. Potgieter, A. Worobiec, R. van Grieken, L. Marjanovic,et al.(2007). Fingerprinting of South African ordinary Portland cements, cement blends and mortars for identification purposes - Discrimination with starplots and PCA.Cement and Concrete Research.37(6), pp.834-843.
PA. Olubambi, S. Ndlovu, JH. Potgieter, JO. Borode (2007). Effects of ore mineralogy on the microbial leaching of low grade complex sulphide ores.Hydrometallurgy.86(1-2), pp.96-104.
PA. Olubambi, S. Ndlovu, JH. Potgieter, JO. Borode (2006). Applied mineralogical studies of Nigerian bulk complex sulphide ore.TMS Annual Meeting.2006, pp.83-91.
JH. Potgieter, C. Green (2006). A novel application of phosphogypsum: Treatment of a diamond mine's slimes tailings.Water SA.32(4), pp.489-497.
SS. Potgieter-Vermaak, JH. Potgieter (2006). Metakaolin as an extender in South African cement.Journal of Materials in Civil Engineering.18(4), pp.619-623.
F. Delalieux, R. van Grieken, JH. Potgieter (2006).Distribution of atmospheric marine salt depositions over Continental Western Europe.Mar Pollut Bull.52(6), pp.606-611.
S. Bakovic, JH. Potgieter, D. deWaal, L. Popovic (2006). Replacing limestone and linseed oil in the synthesis of putty.Journal of Applied Sciences.6(5), pp.1009-1016.
SS. Potgieter-Vermaak, JH. Potgieter, R. Van Grieken (2006). The application of Raman spectrometry to investigate and characterize cement, Part I: A review.Cement and Concrete Research.36(4), pp.656-662.
SS. Potgieter-Vermaak, JH. Potgieter, M. Belleil, F. Deweerdt, R. Van Grieken (2006). The application of Raman spectrometry to the investigation of cement: Part II: A micro-Raman study of OPC, slag and fly ash.Cement and Concrete Research.36(4), pp.663-670.
PA. Olubambi, S. Ndlovu, JH. Potgieter, JO. Borode (2006). Influence of applied mineralogy in developing an optimal hydrometallurgical processing route for complex sulphide ores.Mineral Processing and Extractive Metallurgy Review.27(2), pp.143-158.
E. Snyders, JH. Potgieter, JT. Nel (2006). The effect of milling and percentage dissociation of plasma dissociated zircon on the colour of Pr-yellow and V-blue zircon pigments.Journal of the European Ceramic Society.26(9), pp.1599-1603.
JH. Potgieter, MA. Kabemba, A. Teodorovic, SS. Potgieter-Vermaak, WG. Augustyn (2006). An investigation into the feasibility of recovering valuable metals from solid oxide compounds by gas phase extraction in a fluidised bed.Minerals Engineering.19(2), pp.140-146.
SS. Potgieter-Vermaak, JH. Potgieter, P. Monama, R. Van Grieken (2006). Comparison of limestone, dolomite and fly ash as pre-treatment agents for acid mine drainage.Minerals Engineering.19(5), pp.454-462.
JH. Potgieter, SS. Potgieter-Vermaak, PD. Kalibantonga (2006). Heavy metals removal from solution by palygorskite clay.Minerals Engineering.19(5), pp.463-470.
A. Jonker, H. Potgieter (2005). Physical properties of composites made from secondary cementitious materials with reference to their suitability for water filters.Proceedings of the International Conference on Application of Codes, Design and Regulations.pp.99-107.
J. Calitz, JH. Potgieter (2005). Corrosion of overhead power transmission conductors in marine environments.SAIEE Africa Research Journal.96(4), pp.306-311.
SS. Potgieter-Vermaak, JH. Potgieter, RA. Kruger, Z. Spolnik, R. Van Grieken (2005). A characterisation of the surface properties of an ultra fine fly ash (UFFA) used in the polymer industry.Fuel.84(18), pp.2295-2300.
SS. Potgieter-Vermaak, RHM. Godoi, RV. Grieken, JH. Potgieter, M. Oujja,et al.(2005).Micro-structural characterization of black crust and laser cleaning of building stones by micro-Raman and SEM techniques.Spectrochim Acta A Mol Biomol Spectrosc.61(11-12), pp.2460-2467.
E. Snyders, JH. Potgieter, J. Nel (2005).The upgrading of an inferior grade zircon to superior opacifier for sanitary ware and glazes.JOURNAL OF THE SOUTH AFRICAN INSTITUTE OF MINING AND METALLURGY.105(7), pp.459-463.
A. Jonker, JH. Potgieter (2005). An evaluation of selected waste resources for utilization in ceramic materials applications.Journal of the European Ceramic Society.25(13), pp.3145-3149.
Z. Spolnik, J. Osán, M. Klepka, K. Lawniczak-Jablonska, R. Van Grieken,et al.(2005). Investigation of the chemical composition of (Na1-xBi x)(MnyNb1-y)O3 ceramics by single particle electron probe X-ray microanalysis with an application of Monte Carlo simulations.Spectrochimica Acta - Part B Atomic Spectroscopy.60(4), pp.525-530.
JH. Potgieter, RI. McCrindle, Z. Sihlali, R. Schwarzer, N. Basson (2005). Removal of iron and manganese from water with a high organic carbon loading. Part I: The effect of various coagulants.Water, Air, and Soil Pollution.162(1-4), pp.49-59.
JH. Potgieter, SS. Potgieter-Vermaak, J. Modise, N. Basson (2005). Removal of iron and manganese from water with a high organic carbon loading. Part II: The effect of various adsorbents and nanofiltration membranes.Water, Air, and Soil Pollution.162(1-4), pp.61-70.
A. Jonker, JH. Potgieter (2005). Refractory properties of insulating materials from secondary cementitious materials (SCMs).Proceedings of the International Conference on Achieving Sustainability in Construction.pp.177-184.
JH. Potgieter, SS. Potgieter, RI. McCrindle (2004). A comparison of the performance of various synthetic gypsums in plant trials during the manufacturing of OPC clinker.Cement and Concrete Research.34(12), pp.2245-2250.
JH. Potgieter, RHM. Godoi, R. Van Grieken (2004). A case study of high-temperature corrosion in rotary cement kilns.Journal of The South African Institute of Mining and Metallurgy.104(10), pp.603-606.
L. Marjanovic, RI. McCrindle, BM. Botha, HJ. Potgieter (2004). Use of a simplified generalized standard additions method for the analysis of cement, gypsum and basic slag by slurry nebulization ICP-OES.Analytical and Bioanalytical Chemistry.379(1), pp.104-107.
M. Loubser, C. Strydom, H. Potgieter (2004). A thermogravimetric analysis study of volatilization of flux mixtures used in XRF sample preparation.X-Ray Spectrometry.33(3), pp.212-215.
JH. Potgieter, SS. Potgieter, RKK. Mbaya, A. Teodorovic (2004). Small-scale recovery of noble metals from jewellery wastes.Journal of The South African Institute of Mining and Metallurgy.104(10), pp.563-571.
SS. Potgieter, JH. Potgieter, S. Panicheva (2004). Investigation into methods of chloride analysis of South African cement and cement-related materials with low chloride concentrations.Materials and Structures/Materiaux et Constructions.37(3), pp.155-160.
SS. Potgieter, N. Panichev, JH. Potgieter, S. Panicheva (2003). Determination of hexavalent chromium in South African cements and cement-related materials with electrothermal atomic absorption spectrometry.Cement and Concrete Research.33(10), pp.1589-1593.
JH. Potgieter, SS. Potgieter, CA. Strydom, O. Gheevarhese (2003). The influence of various common ions on the slaking of some South African limes.Water SA.29(4), pp.433-436.
JH. Potgieter, SS. Potgieter, RI. McCrindle, CA. Strydom (2003). An investigation into the effect of various chemical and physical treatments of a South African phosphogypsum to render it suitable as a set retarder for cement.Cement and Concrete Research.33(8), pp.1223-1227.
NM. Agyei, CA. Strydom, JH. Potgieter (2003).Reply to the discussion by A. Demirbas of the paper “The removal of phosphate ions from aqueous solution by fly ash, slag, ordinary Portland cement and related blends”.Cement and Concrete Research.33(6), pp.937-937.
A. Demirbaş, NM. Agyei, CA. Strydom, JH. Potgieter (2003). A discussion of the paper "The removal of phosphate ions from aqueous solutions by fly ash, slag, ordinary Portland cement and related blends" by N.M. Agyei, C.A. Strydom and J.H. Potgieter.Cement and Concrete Research.33(6), pp.935-937.
J. Abonyi, FD. Tamás, S. Potgieter, H. Potgieter (2003). Analysis of trace elements in South African clinkers using latent variable model and clustering.South African Journal of Chemistry.56, pp.15-20.
JH. Potgieter, SS. Potgieter (2003). Mining backfill formulations from various cementitious and waste materials.Indian Concrete Journal.77(5), pp.1071-1075.
SS. Potgieter, H. Potgieter (2003). Hexavalent chromium speciation in a cement matrix.American Laboratory.35(4), pp.26-28.
JH. Potgieter, SS. Potgieter, D. De Waal (2003). An empirical study of factors influencing lime slaking Part II: Lime constituents and water composition.Water SA.29(2), pp.157-160.
JH. Potgieter, SS. Potgieter, RI. McCrindle, FD. Tamas (2003). Fingerprinting of South African cement clinkers and gypsum as a tool for cement identification purposes.Advances in Cement Research.15(2), pp.45-50.
NM. Agyei, CA. Strydom, JH. Potgieter (2002). The removal of phosphate ions from aqueous solution by fly ash, slag, ordinary Portland cement and related blends.Cement and Concrete Research.32(12), pp.1889-1897.
JH. Potgieter, KA. Horne, SS. Potgieter, W. Wirth (2002). An evaluation of the incorporation of a titanium dioxide producer's waste material in Portland cement clinker.Materials Letters.57(1), pp.157-163.
JH. Potgieter, SS. Potgieter, M. Loubser, E. Kearsley, CA. Strydom (2002). Stabilisation of a ferro-industry waste in various solid matrices.Journal of Chemical Technology and Biotechnology.77(3), pp.311-314.
JH. Potgieter, SS. Potgieter, SJ. Moja, A. Mulaba-Bafubiandi (2002). An empirical study of factors influencing lime slaking. Part I: Production and storage conditions.Minerals Engineering.15(3), pp.201-203.
JH. Potgieter, SS. Potgieter, SJ. Moja, A. Mulaba-Bafubiandi (2002). The standard reactivity test as a measure of lime's quality.Journal of The South African Institute of Mining and Metallurgy.102(1), pp.67-69.
O. Gheevarhese, CA. Strydom, JH. Potgieter, SS. Potgieter (2002). The influence of chloride and sulphate ions on the slaking rate of lime derived from different limestone deposits in South Africa.Water SA.28(1), pp.45-48.
MA. Legodi, D. de Waal, JH. Potgieter, SS. Potgieter (2001).Rapid determination of CaCO3 in mixtures utilising FT—IR spectroscopy.Minerals Engineering.14(9), pp.1107-1111.
A. Van Bennekom, JH. Potgieter (2001). Effect of surface alloyed silver on corrosion behavlour of austenitic stainless steel in sulphuric acid.Surface Engineering.17(1), pp.71-74.
MA. Legodi, D. De Waal, JH. Potgieter (2001). Quantitative determination of CaCO3 in cement blends by FT-IR.Applied Spectroscopy.55(3), pp.361-365.
JH. Potgieter, SS. Potgieter, B. Legodi (2001). Proposed modifications to the method for the determination of available lime.Minerals Engineering.14(5), pp.515-523.
JH. Potgieter, SS. Howell-Potgieter (2001). A plant investigation into the use of treated phosphogypsum as a set-retarder in OPC and an OPC/FLY ash blend.Minerals Engineering.14(7), pp.791-795.
MA. Legodi, D. De Waal, JH. Potgieter, SS. Potgieter (2001). Technical note rapid determination of CaCo3 in mixtures utilising FT-IR spectroscopy.Minerals Engineering.14(9), pp.1107-1111.
L. Marjanovic, RI. McCrindle, BM. Botha, J. Hermanus Potgieter (2000).Analysis of cement by inductively coupled plasma optical emission spectrometry using slurry nebulization.Journal of Analytical Atomic Spectrometry.15(8), pp.983-985.
A. van Bennekom, JH. Potgieter (2000). An examination of the cause of extensive corrosion of the shell of a 3CR12 conditioning tower in a cement plant.Anti-Corrosion Methods and Materials.47(3), pp.152-155.
NM. Agyei, CA. Strydom, JH. Potgieter (2000). An investigation of phosphate ion adsorption from aqueous solution by fly ash and slag.Cement and Concrete Research.30(5), pp.823-826.
EM. Van Der Merwe, CA. Strydom, JH. Potgieter (1999). Thermogravimetric analysis of the reaction between carbon and CaSO4·2H2O, gypsum and phosphogypsum in an inert atmosphere.Thermochimica Acta.340-341, pp.431-437.
JH. Potgieter, H. Kaspar (1999). Hydration of cement.South African Journal of Chemistry.52(4), pp.104-109.
JH. Potgieter, W. Mhlongo (1999). A re-evaluation of the method for available lime determination.ZKG International.52(5),
CA. Strydom, JH. Potgieter (1999). Dehydration behaviour of a natural gypsum and a phosphogypsum during milling.Thermochimica Acta.332(1), pp.89-96.
JH. Potgieter, W. Mhlongo (1999). Re-evaluation of the method for available lime determination.ZKG International.52(5), pp.260-263.
JH. Potgieter, CA. Strydom (1999). Determination of the clay index of limestone with methylene blue adsorption using a UV-VIS spectrophotometric method.Cement and Concrete Research.29(11), pp.1815-1817.
JH. Potgieter, K. Horne (1998). A comparison of different methods of chloride determination in cement and cement-related materials: Part 2.South African Journal of Chemistry.51(4), pp.174-177.
JH. Potgieter, C. Kaiser, C. Viviers (1998). Cement analysis by atomic absorption spectrophotometry.World Cement.29(5), pp.102-106.
IM. Wolff, LE. Iorio, T. Rumpf, PVT. Scheers, JH. Potgieter (1998). Oxidation and corrosion behaviour of Fe-Cr and Fe-Cr-Al alloys with minor alloying additions.Materials Science and Engineering A.241(1-2), pp.264-276.
G. Myburg, K. Varga, WO. Barnard, P. Baradlai, L. Tomcsányi,et al.(1998). Surface composition of Ru containing duplex stainless steel after passivation in non-oxidizing media.Applied Surface Science.136(1-2), pp.29-35.
JH. Potgieter, K. Horne (1997).A comparison of different methods of chloride determination in cement and cement-related materials.SOUTH AFRICAN JOURNAL OF CHEMISTRY-SUID-AFRIKAANSE TYDSKRIF VIR CHEMIE.50(3), pp.123-127.
JH. Potgieter (1997). High temperature chemistry in a cement clinker kiln.South African Journal of Chemistry.50(3), pp.111-114.
JH. Potgieter, K. Varga (1997). The influence of various major and minor alloying elements on the corrosion of an Fe-40%Cr superferritic stainless steel in sulphuric acid.Materials and Corrosion - Werkstoffe und Korrosion.48(4), pp.221-227.
K. Varga, P. Baradlai, WO. Barnard, G. Myburg, P. Halmos,et al.(1997). Comparative study of surface properties of austenitic stainless steels in sulfuric and hydrochloric acid solutions.Electrochimica Acta.42(1), pp.25-35.
I. Gutman, JH. Potgieter (1997). Wiener index and intermolecular forces.Journal of the Serbian Chemical Society.62(3), pp.185-192.
CA. Strydom, EM. van der Merwe, JH. Potgieter (1997). Thermogravimetric studies of the synthesis of CaS from gypsum, CaSO4·2H2O and phosphogypsum.Journal of Thermal Analysis.49(3), pp.1501-1507.
JH. Potgieter, W. Wirth (1996). An investigation into ash-ring formation in a rotary lime kiln.ZKG International.49(3), pp.166-171.
JH. Potgieter, CA. Strydom (1996). An investigation into the correlation between different surface area determination techniques applied to various limestone-related compounds.Cement and Concrete Research.26(11), pp.1613-1617.
JH. Potgieter, A. Van Bennekom (1996). The corrosion behaviour of an exotic duplex stainless steel containing small ruthenium additions in sulphuric acid.Scandinavian Journal of Metallurgy.25(5), pp.216-223.
JH. Potgieter (1996). The effect of ruthenium on the corrosion behaviour of a 22 mass% chromium ferritic stainless steel in 1 M sulphuric acid.Journal of Materials Science Letters.15(16), pp.1408-1411.
DL. Hudson-Lamb, CA. Strydom, JH. Potgieter (1996). The thermal dehydration of natural gypsum and pure calcium sulphate dihydrate (gypsum).Thermochimica Acta.282-283(SPEC. ISS.), pp.483-492.
K. Varga, P. Baradlai, WO. Barnard, JH. Potgieter, P. Halmos (1996).Investigation of the surface properties of metals by radiotracer technique .7. Comparative study of surface properties of austenitic and duplex stainless steels in aqueous solutions of HCl and H2SO4.MAGYAR KEMIAI FOLYOIRAT.102(3), pp.143-165.
JH. Potgieter, W. Wirth (1996). Investigation into ash-ring formation in a rotary lime kiln.ZKG International.49(3),
I. Gutman, JH. Potgieter (1996).The Wiener index an intermolecular forces.SOUTH AFRICAN JOURNAL OF SCIENCE.92(1), pp.47-48.
I. Gutman, JH. Potgieter (1996). Die Wiener indeks en intermolekulêre kragte.South African Journal of Science.92(1), pp.47-48.
CA. Strydom, QI. Roode, JH. Potgieter (1996). Thermogravimetric and x-ray powder diffraction analysis of precipitator dust from a rotating lime kiln.Cement and Concrete Research.26(8), pp.1269-1276.
JH. Potgieter, WO. Barnard, G. Myburg, K. Varga, P. Baradlai,et al.(1996). Corrosion behaviour of duplex stainless steels containing minor ruthenium additions in reducing acid media.Journal of Applied Electrochemistry.26(11), pp.1103-1110.
CA. Strydom, DL. Hudson-Lamb, JH. Potgieter, E. Dagg (1995). The thermal dehydration of synthetic gypsum.Thermochimica Acta.269-270(C), pp.631-638.
JH. Potgieter, P. Ellis, A. Van Bennekom (1995). Investigation of the Active Dissolution Behaviour of a 22% Chromium Duplex Stainless Steel with Small Ruthenium Additions in Sulphuric Acid.ISIJ International.35(2), pp.197-202.
P. Baradlai, K. Varga, WO. Barnard, JH. Potgieter (1995). Comparative study of surface properties of steels. II. Duplex stainless steels.Korrozios Figyelo.35(4), pp.97-104.
JH. Potgieter, A. Van Benekom (1995). The effect of varying ruthenium content on the corrosion behaviour of two cathodically modified superferritic stainless steels.Canadian Metallurgical Quarterly.34(2), pp.143-146.
P. Baradlai, JH. Potgieter, WO. Barnard, L. Tomcsanyi, K. Varga (1995). Investigation of spontaneous passivation of stainless steels modified with ruthenium.Materials Science Forum.185-188, pp.759-768.
JH. Potgieter, HC. Brookes (1995). Corrosion behavior of a high-chromium duplex stainless steel with minor additions of ruthenium in sulfuric acid.Corrosion.51(4), pp.312-320.
WO. Barnard, G. Myburg, FD. Auret, JH. Potgieter, P. Ressel,et al.(1995). The role of Ru in improving Schottky and ohmic contacts to InP.Vacuum.46(8-10), pp.893-897.
J. Ginsztler, I. Mészáros, L. Dévényi, B. Hidasi, JH. Potgieter (1995). Magnetic investigations of stainless steels.International Journal of Pressure Vessels and Piping.61(2-3), pp.471-478.
I. Gutman, JH. Potgieter (1994). Isomers of benzene.Journal of Chemical Education.71(3), pp.222-224.
JH. POTGIETER (1993).EFFECT OF MINOR RUTHENIUM ADDITIONS ON THE CORROSION BEHAVIOR OF DUPLEX STAINLESS-STEELS IN SULFURIC-ACID.SOUTH AFRICAN JOURNAL OF CHEMISTRY-SUID-AFRIKAANSE TYDSKRIF VIR CHEMIE.46(3-4), pp.58-64.
JH. Potgieter, W. Skinner, AM. Heyns (1993). The nature of the passive film on cathodically modified stainless steels.Journal of Applied Electrochemistry.23(1), pp.11-18.
JH. Potgieter, P. de Visser (1993). Potentiostatic etching of duplex stainless steels and high chromium white cast irons.Materials Science and Technology (United Kingdom).9(4), pp.336-342.
JH. Potgieter (1992).Benzene isomers? (the author replies).Journal of Chemical Education.69(10), pp.859-859.
JH. Potgieter, LM. Matthews, P. De Visser (1992). Experimental study of quantitative phase characterization in duplex stainless steels by potentiostatic etching.Journal of Materials Science.27(13), pp.3667-3679.
JH. POTGIETER, AM. HEYNS (1992).CORROSION EDUCATION IN SOUTH-AFRICA.SOUTH AFRICAN JOURNAL OF SCIENCE.88(2), pp.65-66.
MG. Reinecke, JH. Potgieter (1992). Benzene isomers? [2] (multiple letters).Journal of Chemical Education.63(10), pp.859-860.
JH. Potgieter (1992). Influence of σ phase on general and pitting corrosion resistance of saf 2205 duplex stainless steel.British Corrosion Journal.27(3), pp.219-223.
JH. POTGIETER (1991).A REVIEW OF THE BIOLOGICAL TREATMENT OF CYANIDE-BEARING WASTE-WATER.JOURNAL OF THE SOUTH AFRICAN INSTITUTE OF MINING AND METALLURGY.91(11), pp.389-396.
JH. Potgieter (1991). Review of the biological treatment of cyanide-bearing waste water.Journal of The South African Institute of Mining and Metallurgy.91(11), pp.389-396.
MB. Cortie, JH. Potgieter (1991). The effect of temperature and nitrogen content on the partitioning of alloy elements in duplex stainless steels.Metallurgical Transactions A.22(10), pp.2173-2179.
JH. POTGIETER, MU. KINCER (1991).AN ELECTROCHEMICAL INVESTIGATION OF THE EFFECT OF NICKEL AND RUTHENIUM ON THE DISSOLUTION OF A HIGH CHROMIUM SUPER-FERRITIC STAINLESS-STEEL IN REDUCING ACID-MEDIA.SOUTH AFRICAN JOURNAL OF CHEMISTRY-SUID-AFRIKAANSE TYDSKRIF VIR CHEMIE.44(2), pp.47-50.
JH. Potgieter (1991). Alloys cathodically modified with noble metals.Journal of Applied Electrochemistry.21(6), pp.471-482.
JH. Potgieter, MB. Cortie (1991). Determination of the microstructure and alloy element distribution in experimental duplex stainless steels.Materials Characterization.26(3), pp.155-165.
AM. De Lange, JH. Potgieter (1991). Acid and base dissociation constants of water and its associated ions.Journal of Chemical Education.68(4), pp.304-305.
JH. Potgieter (1991). Adsorption of methylene blue on activated carbon: An experiment illustrating both the langmuir and freundlich isotherms.Journal of Chemical Education.68(4), pp.349-350.
JH. Potgieter (1991). The diverse nature of the C6H6 molecule.Journal of Chemical Education.68(4), pp.280-281.
JH. Potgieter, AM. Heyns, W. Skinner (1990). Cathodic modification as a means of improving the corrosion resistance of alloys.Journal of Applied Electrochemistry.20(5), pp.711-715.
JH. POTGIETER, SC. TJONG (1990).ELECTROCHEMICAL-BEHAVIOR OF THE DUPLEX FECRNIMO ALLOYS IN ACIDIC AND NEUTRAL SODIUM-CHLORIDE SOLUTIONS.SOUTH AFRICAN JOURNAL OF CHEMISTRY-SUID-AFRIKAANSE TYDSKRIF VIR CHEMIE.43(2), pp.59-65.
JH. Potgieter, MB. Cortie (1990). High-chromium, low-nitrogen duplex stainless steels.Journal of The South African Institute of Mining and Metallurgy.90(5), pp.111-118.
JH. Potgieter (1990). An experimental study of the adsorption behaviour of methylene blue on activated carbon.Colloids and Surfaces.50(C), pp.393-399.
JH. POTGIETER, JG. LEIPOLDT, SS. BASSON (1989).AN IMPROVED SYNTHESIS OF [RH(BETA-DIKETONE)(COD)] COMPLEXES.SOUTH AFRICAN JOURNAL OF CHEMISTRY.42(3), pp.120-121.
HH. Potgieter (1989). Kinetics of the substitution of β-Diketones in β-diketonato(1,5-cyclooctadiene)rhodium(I) complexes by benzoyl-1,1,1-trifluoroacetone.Journal of Organometallic Chemistry.366(3), pp.369-375.
CA. BOOTHROYD, JH. POTGIETER, MB. CORTIE (1989).METALLURGICAL EXAMINATION OF AN UNIDENTIFIED FALLEN OBJECT.SOUTH AFRICAN JOURNAL OF SCIENCE.85(5), pp.326-327.
JH. Potgieter (1989). Spectrophotometric determination of the reaction stoichiometry of the reduction of octacyanotungstate(V) by hydroxylamine in acidic and basic media.Polyhedron.8(17), pp.2213-2214.
JG. Leipoldt, SS. Basson, JH. Potgieter (1986). The crystal structure of 1,1,1-trifluoro-5,5,5-trimethylpentanedionatocarbonyltriphenylphosphinerhodium(I).Inorganica Chimica Acta.117(1),
·Chapters in books
S. Potgieter-Vermaak, R. Van Grieken, JH. Potgieter (2012). Integrated analytical techniques for analysing individual environmental particles. pp.123-140.
JH. Potgieter, L. Van Dyk, Y. Chen, A. Rathi (2011). Alternative approaches to iron extraction. In:Advances in Environmental Research. pp.85-106.
S. Potgieter-Vermaak, R. Van Grieken, JH. Potgieter (2010). Integrated analytical techniques for the characterisation of environmental particles. pp.12-16.
·Conferences
AO. Adegbenjo, E. Nsiah-Baafi, PA. Olubambi, JH. Potgieter, MB. Shongwe,et al.(2017).Dependence of Fracture Patterns in Spark Plasma Sintered Irregular Shaped Ti6Al4V Powders on Densification.In:Procedia Manufacturing. Skukuza, SOUTH AFRICA, 23/1/2017. pp.567-572.
JH. Potgieter, S. Potgieter-Vermaak, W. Purcell (2017). Quantification of scandium in columbite-tantalite tailings and other scandium compounds. In:Proceedings - European Metallurgical Conference, EMC 2017. pp.1797-1807.
S. Potgieter-Vermaak, N. Maledi, JH. Potgieter, R. Sparkes, N. Wagner (2016). Organic and inorganic characterisation of different coals by single particle analysis. In:33rd Annual International Pittsburgh Coal Conference: Coal - Energy, Environment and Sustainable Development, PCC 2016.
JH. Potgieter, N. Wagner, S. Potgieter-Vermaak, W. Mohamed (2016). The use of microwave energy to desulphurize S.A coal. In:33rd Annual International Pittsburgh Coal Conference: Coal - Energy, Environment and Sustainable Development, PCC 2016.
A. Worobiec, S. Potgieter-Vermaak, L. Darchuk, V. Vishnyakov, H. Potgieter,et al.(2010). Behavior of semi-volatile particles under a laser and electron beam - Influence on the quality of analytical results. In:AIP Conference Proceedings. pp.523-524.
S. Potgieter-Vermaak, JH. Potgieter, R. Van Grieken (2010). Is the micro-Raman-SEM-EDX combination the answer to surface analysis? A case study of atmospheric corrosion. In:AIP Conference Proceedings. pp.521-522.
JH. POTGIETER (1992).INFLUENCE OF TEMPERATURE ON THE CORROSION BEHAVIOR OF DUPLEX STAINLESS-STEEL CATHODICALLY MODIFIED WITH RUTHENIUM IN SULFURIC-ACID.In:12TH SCANDINAVIAN CORROSION CONGRESS & EUROCORR '92, VOL I. ESPOO, FINLAND, 31/5/1992. pp.159-174.
Invited papers
Invited/guest and plenary lectures:
Nov 1992 - Raikes Medal, lecture, Mintek, Randburg
March 1993 Department of Chemistry, University of Reunion, Reunion
Sept 1994 - Department of Chemistry, University of the Orange Free State
Sept 1995 - University of Veszprem, Dept of Radiochemistry.
Central Research Institute for Chemistry of the Hungarian Academy of Sciences, Budapest, Hungary
Physical Chemistry Institute of Attilla Joszef University, Szeged, Hungary
Department of Engineering Materials, Technical University of Budapest, Budapest, Hungary
Jan 1997 - Inorganic ‘97 Conference, Port Elizabeth, South Africa - Plenary Paper
Feb 2000 - Inaugural professorial lecture Technikon Pretoria: Cement – a dull grey powder, or an
extraordinary material?
March 2002 - Department of Chemical Technology, Delft university of Technology
Centre for Applied Energy Research, University of Kentucky, Lexington, Kentucky, USA
Energy & Environmental Research Centre, University of North Dakota, Grand Forks, North Dakota, USA.
Sept 2003 - Department of Civil Engineering, Purdue University, West Lafayette, Indiana, USA
March 2004 - Workshop: Study of transport and deposition fluxes of heavy metals in the Tisza river after a recent massive pollution event, Corsendonck Priory, Oud-Turnhout, Belgium.
October 2004 - Swiss Lab Electrochemistry Workshop, University of Pretoria, Pretoria, S.A. (Electrochemical measurement applications in cement and concrete)
July 2007 - Department of Materials, Oxford University, Oxford, UK (A review of cathodic modification to
improve corrosion resistance of stainless steels)
February 2008 - Department of Chemistry, University of Antwerp, Belgium (Adsorption behaviour and models for various phenols on fly ash)
Nov 2009 - Royal Society of Chemistry 35th John Dalton Lecture, Royal Northern College of Music,
Manchester, UK (Metallurgy of a Samurai Sword)
March 2010 - Department of Chemical & Metallurgical Engineering, Tshwane University of Technology,
Pretoria, South Africa (Cathodic modification as a means to improve the corrosion resistance of stainless steels)
Sept 2011 - School of Materials, Manchester University, Manchester, UK (Cathodic modification as a way to improve corrosion resistance of various alloys)
Aug 2012 - Corrosion Institute of South Africa (CorrISA), How to improve the corrosion resistance of
stainless steels with PGM additions, Midrand, SA.
Nov 2013 - Plenary lecture at the launch of CREW (Centre for Renewable Energy and Water), VUT (Vaal University of Technology), SA – Fly ash in water treatment – Vanderbijl Park, South Africa
July 2014 - Plenary lecture Africorr – Corrosion in Africa – an educational perspective, Farm Inn,
Pretoria, 28 July – 1 Aug 2014, S.A.
Dec 2014 - Royal Society of Chemistry John Leach Memorial Lecture, MMU, Manchester, UK (Sword making in ancient Japan)
Aug 2016 - 2nd International Africorr Corrosion, 27-29 July 2016, Midrand Town, South Africa
(Panel Member for Discussion: Corrosion – who pays the cost?)
July 2018 Department of Minerals Processing, Wuhan Institute of Technology, Wuhan, China (A New paradigm in Minerals Processing)
Department of Metallurgy and Materials Science, Hunan University of Technology, Zhouzou, China
Department of Environmental Science and Engineering, Huazhong University of Science and Technology, Wuhan, China
March 2019 International conference on Mechanical, Metallurgy and Materials Science, 28-29 March 2019, Milan, Italy – Keynote speaker
July 2019 Second China Minerals Processing Conference, 19-21 July 2019, Wuhan, China – invited speaker
Conference organisation
Member Organising Committee of the 24th International Pittsburgh Coal Conference, Sept 2007, Sandton, South Africa
Member Organising Committee of the 8th International Corrosion Conference, Military History Museum, Jhb., 14-15 Nov 2006, South Africa
Member Organising Committee of the Postgraduate Chemical Engineering and Metallurgical Engineering Student Symposium , University of Pretoria, Pretoria, 2-3 Aug 2007, South Africa
Organising International Conference on Mechanical, Metallurgy and Materials Science, 28-29 March 2019, Milan, Italy – Keynote speaker
Organising 20th International Metallurgy and Materials Congress, 12 – 14 Nov 2020, Istanbul, Turkey
Expert reviewer for journals and publishers
Acted as referee for 77 different reputable journals.
Grants
2010 EPSRC Bridging the Gaps Program (Grant ref EP/H000291/1) (CI with Dr. L. Tosheva) £ 5 000
2012 RSC Analytical Trust Fund £ 1 440
2014 Analytical Chemistry Trust Fund African Visiting academic grant £ 4 990
2016 DRD Gold ZAR 6 million
Engagement & Knowledge Exchange
Patents
J.H. Potgieter and P.T.Wedepohl, "Stainless Steel Composition", European patent No 93309621.6
J.H. Potgieter and P. Stuiver, “Calcium oxide carbonation to produce calcium carbonate”, S.A. Patent no. 98/4206
Awards, Honours & Distinctions
Expert reviewer for external funding bodies
REVIEWING ROLES:
Reviewer of research proposals, researchers, promotion applications and government research programmes:
UK EPSRC,
Flemish FWO,
TWAS (Third World Academy of Sciences, Italy),
Wallonian FNRS,
IFS (International Foundation of Science, Sweden)
NRF (National Research Foundation, SA), and
Northwest University (SA)
King Fahd University (Saudi Arabia)
Lagos University (Nigeria)
Member, DST (SA Government Department of Science & Technology) AMI (Advanced Metals Initiative) Review Team, Sept. 2008
Visiting and honorary positions
HONORARY/VISITING POSITIONS:
Visiting professor: Wuhan Institute of Technology, China (2018 - current)
Visiting professor: Aalto University, Finland (2020 - current)
Visiting professor: Beijing University of Technology, China (2018 - current)
Visiting professor: Tshwane University of Technology, South Africa (2014 - current)
Editorial board membership
Journal Editor roles:
Associate Editor: Corrosion Engineering, Science and Technology (2013 - )
Editor (one of team of 3): African Corrosion Journal (2014 - current)
Subject editor: South African Journal of Science & Technology (2018 - current)
Member of Editorial Boards:
Journal of Hazardous Materials (2004 - 2014)
Journal of Radioanalytical and Nuclear Chemistry (2003 - 2014)
Journal of the Southern African Institute of Mining and Metallurgy (2005 - 2019)
Materials (2019 - current)
ACADEMIC PROGRAMME ACCREDITATION ROLES:
Leader of Metallurgical Engineering accreditation teams to: UNAM (University of Namibia) (2015) and NUST (National University of Science and Technology, Namibia) (2016)
Leader Assessment team for new Civil Engineering degree for Abu Dhabi Council of Higher Education (2018)
ECSA (Engineering Council South Africa) Accreditation team to University of Pretoria, Sept 2007 (Metallurgy team)
Membership of professional associations
PROFESSIONAL BODIES' AFFILIATIONS & HONORARY POSITIONS:
Fellow of the South African Academy of Engineering 2019
MCorrISA 1986 and Honorary life member 2019
Member of the Society of Mining Professors (SOMP) 2016
FRSC - 2014
Fellow of IOM3 2012
MICorr 2009
MemSci 2008
FSAIMM 2006
AFIChemE/SAIChE 2005
Manchester Met full-time employee and will teach at Manchester Metropolitan Joint Institute, Hubei University.
